Bulk Cables
-
24AWG 2 Pair DMX 512 Cable
This DMX lighting control cable features 110ohm characteristic impendence, designed specifically for DMX 512 control systems. It contains 2 twisted pairs of low impedance conductors for control and auxiliary signals.
-
Waterproof Cat5e Ethernet Cable
This gigabit cat5e ethernet cable is waterproof and designed for outdoor use. The rugged jacket material can withstand sunlight, dirt, snow, and moisture which makes this cable available for directly bury or install in conduit. It features 24AWG 0.51 solid OFC copper conductor offering high conductive & low impedance data transmission. It is ideal for outdoor and indoor network installation at home or office, routers, VoIP phones, IP cameras, printers, gaming consoles, routers, Ethernet extenders, switch boxes, PoE devices and other high-performance networking applications
-
SFTP Cat5e Ethernet cable
This dual shielded Cat5e network cable stands out especially for its high density braid shield protect the cable from EMI &RFI interference, and therefore highly reduces crosstalk. It’s compliant to the requirements to Category 5e patch cables acc. to ISO/IEC 11801, EN 50173-1, IEC 61156-6 und EN 50288-2-2, and can be used in class D like 10Base-T, 100Base-T, 1000Base-T, Token Ring, FDDI, ISDN, ATM, audio networks like EtherSound™ and DMX lighting controls.
-
High Speed CAT5E Ethernet Cable
This high speed cat5e ethernet cable features 24AWG (0.51MM) OFC copper conductor. Its high conductivity allows low impedance and provide best data signal transmission. The HDPE insulation material and precisely pair twists protected the cable from interference and high reduces cross talk. The jacket material is 100% new and rugged material to against cut scrap and tearing. It can be widely used for indoor network installation, surveillance signal and communication data transmission.
-
Low Impedance Microphone Cable
This microphone cable features high-flex PVC jacket, which is rugged, tear-resistant, and specially designed for low temperature environment. The high density OFC braid shield prevent electromagnetic interference and provides excellent sound performance. It can commonly used for microphone connection, studio recording and outdoor mobile applications
-
OFC High Performance Microphone Cable Spiral shielded for Installation
This 2 cores balanced microphone cable features high-flex matt brown jacket, which can be applicable for wide temperature environment, from -30 ℃ to 70 ℃. This rugged material allows this cable to be either installed in doors or for outdoor mobile use. The high density tinned copper spiral screen protects the cable from EMI & RFI interference. Together with 24AWG conductor, this cable provides perfect sound experience
-
U/UTP Cat6 Ethernet Cable 4P 24AWG
CEKOTECH U/UTP Cat6 network cable is designed to have fast, stable, durable and high-performance transmission. Crafted with 24WG high conductive OFC copper, the 4 pairs lan cable transmit faster, and longer distance, while oxidizing resistance and thus have better lifetime. It provides 250 MHz of bandwidth, and data transfer speeds up to 10 Gbps (10GBASE-T) for distances up to approximately 50m.
-
2 Cores Flame Retardant LSZH Speaker Cable for Building Installation
This cable is designed for permanent installations in public buildings. The flame retardant level is IEC 60332-3 Cat C & UL CMR. And the cable is also halogen free so that – in case of fire-no toxic fumes will be emitted. It features 2X4.0MM high purity Oxygen free copper (OFC) conductor, perfect for high-end professional audio fixed installations, Home theater grade, speaker audio, power-limited circuit, and communication.
-
2 Cores Twisted Speaker Cable 2X2,5MM2, PVC, OD10,0MM
The 2-conductor speaker cable is specially designed for Pro-audio mobile applications. The 2×2.5mm2 fine stranded Oxygen free copper wire provide low conductor resistance, which provides better the ability to control speaker excursion to create sharp, clear quality in the low-end frequency range. The jacket of this pro audio speaker cable is made of high flexible and durable PVC, which provide best protects to the inner structure. And the cotton yarn filler highly increases the pulling strength of the cable and also better bending radius. The precisely designed twist pitch minimizes the Electromagnetic interference (EMI).
-
Speaker Cable 2X1.0MM2, 17AWG, OD7.0MM PVC
The 2×1.0mm2 speaker cable is regular use for home installation and comment loudspeaker fixed installation. The Oxygen-free copper (OFC) conductor has made sure of high-fidelity sound transmission and prevent conductor from being oxidized. The jacket of this cable is very flexible, and easy to roll to cable reel by hand. The two conductors of the speaker wire are twisted and filled with cotton yarns, which provide bigger tensile strength. All the above features make this cable perfect for stage installation or mobile applications.
-
Two Conductors Speaker Cable Twisted 2×1,5mm2 PVC OD7.5MM
The 2-conductor speaker cable is specially designed for Pro-audio mobile applications. The 2×1.5mm2 fine stranded Oxygen free copper wire provide low conductor resistance, which provides better the ability to control speaker excursion to create sharp, clear quality in the low-end frequency range. The jacket of this pro audio speaker cable is made of high flexible and durable PVC, which provide best protects to the inner structure. And the cotton yarn filler highly increases the pulling strength of the cable and also better bending radius. The precisely designed twist pitch minimizes the Electromagnetic interference (EMI).
-
Single Channel Star Quad Microphone Cable
CEKOTECH Star-quad cable is a four-conductor cable that specifically twisted. Its double balanced paring which provides magnetic immunity, offering outstanding noise rejection during audio signal transmission.
